Instruction manual
NivuSonic Clamp on
®
The progress is going to be indicated by a corresponding bar:
Fig. 8-69
Saving parameters on memory card
The menu point „Load parameters“ first of all shows all programming files avail-
able on the card. The file is going to be transmitted to the NivuSonic CO after
the point has been selected.
The name of the required file is „PARAMET.NIV“.
save
= NivuSonic CO
Æ
card
load
= card
Æ
NivuSonic CO
Data which have been stored within the past 14 days in the NivuSonic CO can
be saved in case of data loss due to faulty data readout, defect cards, uninten-
tional formatting or similar. Use the menu >Store backup<.
Fig. 8-70
Data backup
8.6.6 I/O Menu Communication
This menu currently only contains the Modbus submenu and serves to recall the
points "Read Input Register" and "Read Holding Register" for verification pur-
poses.
Fig. 8-71
„Read Input Register“ / „Read Holding Register“
NivuSonic CO - Rev. 00 as of 08.12.2010
Page 81
Summary of Contents for NivuSonic Clamp On
Page 109: ...18 Declaration of Conformity...
Page 110: ......
