®
Instruction manual
NivuSonic Clamp on
6.6
Communication
6.6.1 General
The NivuSonic CO allows remote access via Ethernet. This means that the unit
can be operated via internal web-server using its self-created website. Perform
remote access as if being on-site.
Requirements:
-
Intranet or TCP/IP network or:
-
Internet access via provider (if connected via ISDN modem or GSM / GPRS
modem)
-
new Internet browser
-
Java
®
There is no need to install any additional software if there is the latest Internet
browser and the latest Java plug-in available on your network PC/Laptop.
If you wish to access the unit via the NIVUS Internet portal it is necessary to
have a permanent Internet connection established (modem or DSL). Once hav-
ing programmed the NivuSonic CO and setting up data transmission the unit can
be accessed from any PC in the world!
Do not confuse NivuSonic CO remote access and process conducting systems.
The remote access to the NivuSonic CO requires direct dialog with the user via
PC. There is no real-time access. It is not possible to carry out automatic data
transmission. A separate MODBUS TCP connection to the unit is provided op-
tionally for this purpose.
Depending on the user’s status the following functions are either accessible or
locked:
Viewer
-
operational conditions, progress lines, sensor status etc. can be selected
and viewed
-
saved data and parameter files can be downloaded
-
settings can be selected but cannot be modified permanently
-
data files cannot be deleted
-
no transmitter updates possible
Page 32
Summary of Contents for NivuSonic Clamp On
Page 109: ...18 Declaration of Conformity...
Page 110: ......
