®
Instruction manual
NivuSonic Clamp on
Direct Access
Required only if a direct 1:1 connection to the NivuChannel is desired to be set
up via Laptop/PC, network cable and the internal RJ45 interface. In this case
determine both; password as well as user name for this internal connection on
PC/Laptop.
Fig. 8-57
Enabling direct unit access
Modbus
This menu determines communication to a master via Modbus TCP. The con-
nection is made on the Ethernet interface.
The respective interface settings (such as IP address etc.) shall be carried out
according to the network topology.
Please see Appendix X.X (Modbus protocol)
Modbus
Measurement span: here you can modify pre-determined measurement spans of
analog signals which are to be transmitted via Modbus. It is however not rec-
ommended to do so since modifying the measurement span here will have an
effect on the length and the contents of the protocol to transmit.
Fig. 8-58
Port registration
Port: Enter the interface port used for protocol transmission here. Please ob-
serve the port to be unlocked at the master (e.g. PC) and contact your responsi-
ble system administrator if required.
Page 76
Summary of Contents for NivuSonic Clamp On
Page 109: ...18 Declaration of Conformity...
Page 110: ......
