Instruction manual
NivuSonic Clamp on
®
Five basic menus can be selected, visible in the headline of the display. They
can be selected individually. The menus are:
RUN
Standard operation mode. Apart from indicating the names of meas-
urement places it allows to display time, flow volume, flow level and
average flow velocity as well as to optionally show flow velocity, day
totals error messages including a function enabling to record flow
volume, flow level and average flow velocity.
PAR
This menu is the most extensive of the NivuSonic CO. It is for the
complete parameter setting of dimensions of the measurement
place, sensors, analog and digital inputs and outputs, storage, data
transmission and regulator function.
I/O
This menu includes information about internal operation of the Nivu-
Sonic CO. All current values can be displayed, as well as the values
of analog and digital outputs and relays. All current values can be
displayed, as well as the values of analog and digital outputs and
relays. Additionally, single velocities are displayed. It further allows
to determine the remaining capacity as well as the remaining mem-
ory time on an optionally plugged memory card resulting from the
cycle time.
CAL
Here it is possible to adjust height (depth) and flow velocity of analog
outputs and to simulate analog as well as digital outputs.
EXTRA
This sub-menu includes basic display settings: contrast, lighting,
language, units, system times and totaliser presets.
NivuSonic CO - Rev. 00 as of 08.12.2010
Page 45
Summary of Contents for NivuSonic Clamp On
Page 109: ...18 Declaration of Conformity...
Page 110: ......
