®
Instruction manual
NivuSonic Clamp on
The transparent door of the measurement transmitter is equipped with a protec-
tive foil for protection during transport and from scratches during assembly. This
protective foil has to be removed immediately after assembly.
If the view door with protection foil is exposed to direct sunlight for a long time,
the foil cannot be easily removed.
Cleaning of the front foil can be undertaken with spirit or if necessary with car
polish. If this is not successful, a new front door can be ordered from NIVUS
GmbH or your local representative
Never change the cable lengths of the sensors delivered since this will lead to
faulty measurements or even complete measurement failures.
6.2.2 Enclosure
dimensions
Fig. 6-1
NivuSonic CO wall mount enclosure
Page 20
Summary of Contents for NivuSonic Clamp On
Page 109: ...18 Declaration of Conformity...
Page 110: ......
