®
Instruction manual
NivuSonic Clamp on
8.5.2 Parameter Menu „LDV“
The parameter settings made here are extremely important regarding the ge-
ometry of the measurement paths. Number as well as positions of single paths
(up to 2) can be set here. These settings determine the functionality of the entire
measurement.
Fig. 8-20
Selection of LDV Parameters
Path number
Firstly determine how many paths are required for measurement (1 or 2).
Each path needs 2 sensors.
Fig. 8-21
Path number entry
The next menu is to determine if the paths are to be used in V-arrangement
or in diagonal mode for measurement.
Path configuration
Fig. 8-22
Entering active measurement paths and measuring orientation
This menu is to enter the number of active measurement paths (up to 2 paths).
Page 58
Summary of Contents for NivuSonic Clamp On
Page 109: ...18 Declaration of Conformity...
Page 110: ......
