®
Instruction manual
NivuSonic Clamp on
Page 68
Operation mode
Fig. 8-40
Activating operation mode
Mode
Pressing this key toggles between:
off
= no data saving
periodic
= cyclic storage of fill level, flow velocity and volume
Periodic interval
This parameter is to set the memory cycle. Select from settings between 1 min-
ute and 1 hour. It is possible to set values between 1 minute and 1 hour. There
are only exact fractional amounts of 1 hour allowed to be set (1 min.; 2 min.;
3 min.; 4 min.; 5 min.; 6 min.; 10 min.; 15 min.; 20 min.; 30 min. or 60 min.).
Entering other values is going to cause the NivuSonic CO to set the next lower
interval value.
Fig. 8-41
Entering the storage cycle
Select data
This parameter point is to define which data sets are to be stored in addition to
the automatic storage of average flow velocity, volume and medium tempera-
ture.
Fig. 8-42
Select data table
System
Use this key to toggle between:
NO
= system parameters will not be saved and
Summary of Contents for NivuSonic Clamp On
Page 109: ...18 Declaration of Conformity...
Page 110: ......
