NEC V850ES/KE1+, User Manual

Page: 586 / 709

CHAPTER 19 STANDBY FUNCTION
User’s Manual U16896EJ2V0UD
586
Table 19-8. Operation Status in Subclock Operation Mode
Operation Status Setting of Subclock
Operation Mode
Item
When Main Clock Is Oscillating When Main Clock Is Stopped
CPU Operable
ROM correction Operable
Subclock oscillator Oscillation enabled
Internal oscillator (f
R
) Operable
Interrupt controller Operable
16-bit timer (TMP0) Operable Stops operation
16-bit timer (TM01) Operable Operable when INTWT is selected as
count clock and f
XT
is selected as count
clock of WT
8-bit timers (TM50, TM51) Operable
•
Operable when TI5m is selected as
count clock
•
Operable when INTTM010 is selected as
count clock and when TM01 is enabled
in subclock operation mode
Timer H (TMH0) Operable Stops operation
Timer H (TMH1) Operable Operable when f
R
/2048 is selected as count
clock
Watch timer Operable Operable when f
XT
is selected as count clock
Watchdog timer 1 Stops operation
Watchdog timer 2 Operable
CSI00, CSI01 Operable Operable when SCK0m input clock is
selected as operation clock
I
2
C0
Note
Operable Stops operation
UART0 Operable Operable when ASCK0 is selected as
count clock
Serial interface
UART1 Operable Stops operation
Key interrupt function Operable
A/D converter Operable Stops operation
Real-time output Operable Operable when INTTM5m is selected as
real-time output trigger and TM5m is
enabled in subclock operation mode
Clock monitor (CLM) Operable Stops operation
Power-on-clear (POC) Operable
Low-voltage detection (LVI) Operable
Port function Settable
Internal data Settable
Note Only in the
μ
PD703302Y, 70F3302Y
Remark m = 0, 1
<R>