manualshive.com logo in svg

NEC SL1100, Features And Specifications Manual

The NEC SL1100 user manual is a comprehensive guide designed to assist users in understanding and operating their SL1100 phone system. Easily accessible for download, the manual offers step-by-step instructions, troubleshooting tips, and valuable insights to maximize the full potential of the SL1100. Get it for free at manualshive.com.

Share
Download
background image

TABLE OF CONTENTS

Chapter 1 Features

Section 1 ABOUT THIS CHAPTER................................................................................... 1-1
Section 2 IMPORTANT NOTES......................................................................................... 1-1

Abbreviated Dialing/Speed Dial................................................................................... 1-3
Account Code Forced/Verified/Unverified................................................................. 1-13
Account Code Entry.................................................................................................. 1-18
Alarm......................................................................................................................... 1-22
Alarm Reports........................................................................................................... 1-24
Alphanumeric Display................................................................................................ 1-32
Analog Communications Interface (ACI)................................................................... 1-34
Ancillary Device Connection ..................................................................................... 1-36
Answer Hold/Automatic Hold..................................................................................... 1-37
Attendant Call Queuing............................................................................................. 1-39
Automatic Call Distribution (ACD)............................................................................. 1-41
Automatic Release.................................................................................................... 1-55
Automatic Route Selection (ARS/F-Route)............................................................... 1-57
Background Music..................................................................................................... 1-67
Barge-In..................................................................................................................... 1-69
Battery Backup - System Memory............................................................................. 1-72
Battery Backup - System Power................................................................................ 1-74
Built-in Automated Attendant .................................................................................... 1-75
Call Arrival (CAR) Keys............................................................................................. 1-78
Call Duration Timer................................................................................................... 1-81
Call Forwarding......................................................................................................... 1-83
Call Forwarding with Follow Me................................................................................ 1-93
Call Forwarding, Off-Premise.................................................................................... 1-95
Call Forwarding/Do Not Disturb Override................................................................ 1-103
Call Monitoring........................................................................................................ 1-105
Call Redirect ........................................................................................................... 1-108
Call Waiting/Camp-On ............................................................................................ 1-110
Callback .................................................................................................................. 1-114
Caller ID Call Return .............................................................................................. 1-117
Caller ID.................................................................................................................. 1-119
Caller ID - Flexible Ringing...................................................................................... 1-129
Caller ID - Shared Logging...................................................................................... 1-136
Central Office Calls, Answering............................................................................... 1-138
Central Office Calls, Placing.................................................................................... 1-143
Class of Service...................................................................................................... 1-148
Clock/Calendar Display/Time and Date.................................................................. 1-157
Code Restriction/Toll Restriction............................................................................. 1-160
Code Restriction Override/Toll Restriction Override............................................... 1-166
Code Restriction, Dial Block/Toll Restriction, Dial Block......................................... 1-171
Conference.............................................................................................................. 1-174
Conference, Remote............................................................................................... 1-179
Conference, Voice Call/Privacy Release................................................................. 1-181
Continued Dialing.................................................................................................... 1-183
Cordless DECT Telephone..................................................................................... 1-185
Data Line Security................................................................................................... 1-189
Delayed Ringing...................................................................................................... 1-191
Department Calling.................................................................................................. 1-193

ISSUE 2.0

SL1100

Features and Specifications Manual

i

Summary of Contents for SL1100

































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SL1100

Jensen JWM6A Quick Reference Manual preview
JWM6A
Brand: Jensen Pages: 2
Jensen JDM118BT Installation And User Manual preview
JDM118BT
Brand: Jensen Pages: 16
Jensen JBS-350 Wall Mount Instructions preview
JBS-350
Brand: Jensen Pages: 2
Waterway NEO 1200 Instruction Manual preview
NEO 1200
Brand: Waterway Pages: 8
HEIDENHAIN LIP 471R Mounting Instructions preview
LIP 471R
Brand: HEIDENHAIN Pages: 32
Roger MC16-PAC-2-KIT Installation Manual preview
MC16-PAC-2-KIT
Brand: Roger Pages: 2
Polyaire Zonemaster Technical Manual preview
Zonemaster
Brand: Polyaire Pages: 20
Daktronics Sportsound SSR-300 Quick Start Manual preview
Sportsound SSR-300
Brand: Daktronics Pages: 6
MPMan DAB320 (German) Manual preview
DAB320
Brand: MPMan Pages: 32
Pilz PNOZ m ES CC-Link Operating Manual preview
PNOZ m ES CC-Link
Brand: Pilz Pages: 24
ICT TS-0698 Manual preview
TS-0698
Brand: ICT Pages: 11
Elko eLAN-RF-003 Instruction Manual preview
eLAN-RF-003
Brand: Elko Pages: 18
MKS EtherCAT 390 Series User Instruction Manual preview
EtherCAT 390 Series
Brand: MKS Pages: 42
Poly Studio R30 User Manual preview
Studio R30
Brand: Poly Pages: 16
CAI Countryman Type 10S Stereo Direct Box Manual preview
Countryman Type 10S Stereo Direct Box
Brand: CAI Pages: 16
Mitel MiVoice Business 3300 ICP Troubleshooting Manual preview
MiVoice Business 3300 ICP
Brand: Mitel Pages: 366
Toa RM-200M Manual preview
RM-200M
Brand: Toa Pages: 9
Curtis RCD633 Specification Sheet preview
RCD633
Brand: Curtis Pages: 1

Brands by name

Popular brands

Load more brands