manualshive.com logo in svg

NEC SL1100, Features And Specifications Manual

The NEC SL1100 user manual is a comprehensive guide designed to assist users in understanding and operating their SL1100 phone system. Easily accessible for download, the manual offers step-by-step instructions, troubleshooting tips, and valuable insights to maximize the full potential of the SL1100. Get it for free at manualshive.com.

Share
Download
background image

Related Features

Abbreviated Dialing/Speed Dial

Automatic Route Selection (ARS/F-Route)

PBX Compatibility/Behind PBX

Station Message Detail Recording

Guide to Feature Programming

The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.

• When a * is listed next to the Program Number it indicates a program that 

MUST 

be set (from a

default state) for this feature to be enabled.

Program

Number

Program Name/Description

Assigned Data

35-05-01 *

Account Code Mode

Per class of service (PRG 20-06-01) this program is used to setup the
account code mode.
For Forced Account codes, options 2 or 3 will be the settings that are
used.

0 = Account Codes Disabled
1 = Account Codes Optional

 (This

is for the account code entry feature.)

2 = Account Code Required Not
Verified

 (Forced Account Codes ena-

bled, no verification with the system
required)

3 = Account Code Required and
Verified

 (Forced Account Codes ena-

bled, verification with PRG 35-06-01
required)

(default = 0)

35-05-02

Forced Account Code Toll Call Setup

Per class of service (PRG 20-06-01) this program is used to enable
account codes for ALL calls or just TOLL calls if PRG 35-05-01 is set
to a 2 or 3.

0 = Account Codes for ALL calls
1 = Account Codes for TOLL calls
(default = 0)

35-05-03

Account Codes for Incoming Calls

Per class of service (PRG 20-06-01) this program is used to allow or
deny users the ability to enter an account code for incoming calls.
Account codes for incoming calls are used in conjunction with SMDR
for billing purposes.

0 = Disabled

 (User cannot enter an

account code.)

1 = Enabled

 (User can enter an ac-

count code while on an incoming
call.)

(default = 0)

35-05-04

Hiding Account Codes

Per class of service (PRG 20-06-01) this program is used to either
hide or show the account code entered on the users display.
When set to hide the account code the users display will show a 

*

 for

every digit dialed instead of displaying the actual digit.

0 = Account Codes Displayed
1 = Account Codes Not Displayed
(default = 0)

35-06-01

Verified Account Code Table

If PRG 35-05-01 is set to a (

3

), required and verified, this is where the

verified account code list is created in the system.
Up to 800 account codes with 1 ~ 16 digits can be entered.
Wild cards can be entered by using the @ symbol. For example @234
means the user can enter 0234 ~ 9234 as valid account codes.
The digit 

*

 cannot be used in the account code because this digit is

used to start and end the account code entry.

Maximum of 16 digits

 (0~9, #, @)

(default =Not Assigned)

40-10-01

VRS Fixed Message

Enable or Disable the system's ability to play the fixed VRS messag-
es.
When enabled the system will play the following message "please en-
ter you account code" when the user is required to enter an account
code.

0 = Disable

 (VRS fixed message will

not be played.)

1 = Enable

 (VRS fixed message will

be played.)

(default = 0)

ISSUE 2.0

SL1100

Features and Specifications Manual

1-15

A

Summary of Contents for SL1100

































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SL1100

Teac CD-X9 Owner'S Manual preview
CD-X9
Brand: Teac Pages: 24
TeachLogic Maxim III Installation Manual preview
Maxim III
Brand: TeachLogic Pages: 21
Fractus Antennas TVNext NN01-054 User Manual preview
TVNext NN01-054
Brand: Fractus Antennas Pages: 14
Notifier AUTOPULSE IQ-318 Manual preview
AUTOPULSE IQ-318
Brand: Notifier Pages: 62
Barco C5011S Installation Manual preview
C5011S
Brand: Barco Pages: 158
HIMA Himax X-COM 01 Manual preview
Himax X-COM 01
Brand: HIMA Pages: 42
Jensen Marine MSR3012 Installation And Operation Manual preview
MSR3012
Brand: Jensen Marine Pages: 18
J&M Corporation JMDM-IPBT-GL18 Installation & Operation Instructions preview
JMDM-IPBT-GL18
Brand: J&M Corporation Pages: 9
NAIM CONNECTIONS Manual preview
CONNECTIONS
Brand: NAIM Pages: 31
Carrier bryant ONEBB3ZAC01 Quick Reference Manual preview
bryant ONEBB3ZAC01
Brand: Carrier Pages: 6
FONESTAR SCF-250 Instruction Manual preview
SCF-250
Brand: FONESTAR Pages: 24
AVer EVC100 User Manual preview
EVC100
Brand: AVer Pages: 107
Jacuzzi JAUTPS Installation & Operation Manual preview
JAUTPS
Brand: Jacuzzi Pages: 28
Panasonic SC-PM33DB Operating Instructions Manual preview
SC-PM33DB
Brand: Panasonic Pages: 24
Panasonic SC-HC20DBEB Operating Instructions Manual preview
SC-HC20DBEB
Brand: Panasonic Pages: 16
Panasonic SG-1060L Operating Instructions Manual preview
SG-1060L
Brand: Panasonic Pages: 31
Panasonic SC-AKX600 Operating Instructions Manual preview
SC-AKX600
Brand: Panasonic Pages: 20
Panasonic SC-VK950 Operating Instructions Manual preview
SC-VK950
Brand: Panasonic Pages: 40

Brands by name

Popular brands

Load more brands