NEC SL1100 Features And Specifications Manual Download

Page: 449 / 864

Feature Name

ML440

Comments

Note

Secretary Call (Buzzer)

Yes

Secretary Call Pickup

Yes

Voice announcement is not supported on ML440 Hand-
set.

Security

N/A

Selectable Display Messaging

Yes

Selectable Ring Tones

Selectable Ring Tones is a function of the ML440 and
not the phone system.

SL Desktop Suite

Softkeys

ML440 Handset Softkeys are fixed and do not follow
SL1100 Softkey settings

Station Hunt

Yes

Station Message Detail Record-
ing

Yes

Station Name Assignment - User
Programmable

Yes

ML440 Handset must be power cycled for change to
show on handset.

Station Relocation

Yes

No confirmation tone is heard. ML440 Handset must be
power cycled to re-register with the AP20 base unit.

T1 Trunking (with ANI/DNIS
Compatibility)

Yes

Tandem Ringing

Tandem Trunking (Unsupervised
Conference)

Yes

The unsupervised conference will be disconnected au-
tomatically based on PRG 24-02-07.

TAPI Compatibility

Tone Override

Yes

Transfer

Yes

Trunk Group Routing

Yes

Trunk Groups

Yes

Trunk Queuing/Camp-On

Unicast/Multicast Paging Mode

Uniform Call Distribution (UCD)

Yes

User Programming Ability

Yes

Virtual Extension

Yes

Voice Mail Integration (Analog)

Yes

Voice Mail Message Indication
on Line Keys

N/A

Voice/Melody Ringing by VM

N/A

Voice Over

Yes

ML440 can initiate voice over but cannot respond to a
voice from another extension.

Voice Response System (VRS)

Voice Response System (VRS)
Upload Download Audio

Voice Response System (VRS) -
Call Forwarding - Park and Page

Yes

Volume Controls

Volume control is a function of the ML440 Handset and
not the phone system.

Warning Tone for Long Conver-
sation

ISSUE 2.0

SL1100

Features and Specifications Manual

1-437

Summary of Contents for SL1100

































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SL1100

Reviews:

Related manuals for SL1100

Brands by name

Popular brands

NEC SL1100, Features And Specifications Manual

Search results

Summary of Contents for SL1100

Reviews:

Related manuals for SL1100

Brands by name

Popular brands