NEC SL1100 Features And Specifications Manual Download | Manualshive

Page: 784 / 864

background image

Virtual Extensions

Version 2.0 or higher

software provides Distinctive ringing (Intercom / Outside) on Virtual Extension.

Description

Virtual Extensions are available software extensions on the Basic and Expanded Port Packages. A
Virtual Extension assigned to a line key, can appear and ring on an individual station or multiple
stations and be used for outbound access.

Up to 50 VE keys are provided.

Conditions

• The 84 available ports/Extensions are assigned on a per extension basis for Virtual EXtension key

mode.

• The 84 available ports/Extensions are assigned per extension for CAR key mode or Virtual

Extension key mode.

• More than one extension can share a Virtual Extension key.
• An extension can have more than one Virtual Extension key assigned.

Assigning a Virtual Extension key of the extension the key is assigned on is not supported.

• Up to 32 incoming calls can be queued to busy Virtual Extension key.
• You cannot have a CAR key and Virtual Extension on the same telephone.
• Virtual Extensions do not support the following features:

- Barge-In
- Conference
- Conference, Voice Call/Privacy Release
- Reverse Voice Over
- Tone Override
- Voice Over

• When a valid system station calls a Virtual Extension appearing on another station, Voice and MW

softkeys appear in the display of the calling station, but they do not operate.

• When talking on a Virtual Extension you cannot mute the handset.
• Incoming calls to a virtual extension that appear on stations that are used with the CTI applications,

PC Assistant, or PC Attendant, do not show up as a second call in the CTI application.

• Calls on Virtual Extension keys cannot be put in Personal Park if PRG 15-18-01 is set to Land on

the key (1).

• If multiple CAR/SIE/VE keys are ringing on a station at the same time, the CAR/SIE/VE key on the

lowest Line Key is answered first.

• Virtual Extension Keys assigned as code

*

03 do not support Voice Mail Message Indication on Line

Keys.

• Busy Virtual Extensions cannot be Tone overridden.
• Class of service feature PRG 20-11-20: No Call Back (transfer recall disable) is not supported for

calls from a physical extension to a virtual extension.

• When a call is parked from a virtual extension, the virtual extension is released.
• When parking a call from a virtual extension, PRG 15-02-21 and PRG 15-18-01 must be set to 1.
• Park Group assignment is by terminal extension, not the virtual extension.
• When a call parked from a virtual extension recalls, it will ring the terminal where the virtual

extension is programmed to, not the virtual extension key.

SL1100

ISSUE 2.0

1-772

Virtual Extensions

V

«
...
782
783
784
785
786
...
»

Summary of Contents for SL1100

































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SL1100

Brand: Magnavox Pages: 26

Brand: ZETRON Pages: 3

FUSION Apollo MS-WB670

Brand: Garmin Pages: 44

ConferenceSHOT AV

Brand: VADDIO Pages: 114

Brand: Panasonic Pages: 45

Brand: Skytec Pages: 12

realpresence trio 8800

Brand: Polycom Pages: 7

Brand: Hioki Pages: 52

Brand: Fusion Pages: 4

Brand: Emerson Pages: 22

Brand: Emerson Pages: 22

Brand: Emerson Pages: 27

Brand: Emerson Pages: 30

Brand: Emerson Pages: 27

Brand: Emerson Pages: 40

Brand: Emerson Pages: 44

Brand: Emerson Pages: 44

Brand: Plank Digital Audio Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands