manualshive.com logo in svg

NEC SL1100, Features And Specifications Manual

Share
Download
NEC SL1100 Features And Specifications Manual Download Page 139

5.

Press the 

STA

 softkey. The display shows:

Store to Personal ABB

ENTER BIN

6.

Press the 

One-Touch

 key in which the number is to be stored or dial 

1~9

, 

0

. If you press 

Hold

key, the next available 

One-Touch

 key will be used. The display shows:

Key ##:

         xxxxxxxxxxxxx

If all One-Touch keys are used, the display shows “TABLE IS FULL”.

7.

Press 

Hold

 key. The display shows:

KEY ##

       -

8.

Enter the name to be associated with the stored number. Refer to 

Table 1-7 Keys for Entering

Names on page 1-124

.

9.

Press 

Hold

 key. The display shows:

KEY PROG STA

10. Press 

Speaker

 key.

The telephone returns to an idle condition.

Temporary Memory

An unanswered call causes the 

Call History

 key (PRG 15-07 or SC 

751

: 

08

) to flash, indicating a new

call was placed in the temporary memory. If enabled in programming, the telephone display shows
CHECK LIST.
1.

Press the 

Call History

 key (PRG 15-07 or SC 

751

: 

08

) or press the 

List

 softkey and CID.

- OR -

Press the 

Left Cursor

 key twice.

The last addition to the list is displayed.

2.

Press the

 ARROW DOWN

 softkey to scroll through the list of numbers in memory.

3.

Press the 

DEL

 softkey to delete the entry and scroll to the next entry.

4.

The 

Call History

 key remains on as long as entries remain in memory.

5.

To place a call back to a number in the temporary memory list, with the number to be dialed
displayed, press a line or 

Speaker

 key. (Refer to 

Table 1-7 Keys for Entering Names on

page 1-124

.)

The outgoing call is placed.

To display Caller ID for a call in Park:

PRG 15-02-08 is set to 0 (preselect) for this feature.

ISSUE 2.0

SL1100

Features and Specifications Manual

1-127

C

Summary of Contents for SL1100

































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands