manualshive.com logo in svg

NEC SL1100, Features And Specifications Manual

Share
Download
NEC SL1100 Features And Specifications Manual Download Page 197

Cordless DECT Telephone

Description

The Cordless DECT Telephone may be used with the SL1100. The DTL-8R-1 TEL uses 1.9 GHz
DECT 6.0 FM Technology and is connected in tandem to a multiline telephone. Refer to the DTL-8R-1
Cordless DECT Manual for more information.

Feature

Cordless DECT Telephone (DTL-8R-1)

Digital Technology

1.9 GHz 6.0

LCD

2-line, 24-digit LCD Display

Silent Alarm

Yes

Dedicated Keys

TALK, TRANSFER, HOLD, CONF, SPEAKER, REDIAL, MUTE, R / VOL

Programmable Line Keys

8

Operational Range

*1

50 ~ 150 feet (expandable with repeaters)

Message Waiting Indication

Yes (Icon)

Headset Connection

Yes

Channels

5 channels by 12 time slot

*1. Determined by environmental conditions. These are cordless RF devices and, therefore, some interference
may take place when operating in the same environment as other wireless devices which operate within the same
frequency spectrum

Conditions

• If using the Base Switching option, Cordless DECT Telephone programmable keys:

- 1 ~ 4 can be set as a Programmable Function key such as Trunk Line Keys.
- 5 and 6 can be set as One-Touch keys.
- 7 and 8 are reserved for Base Switching and cannot be programmed.

• If the Base Switching option is 

not

 used, programmable keys 1 ~ 8 can be programmed as

Programmable Function Keys such as Trunk Line Keys.

• The Cordless DECT telephone can be used in conjunction with the SL1100 and IP4WW-xxTXH

Digital Multiline Telephones.

• Cordless DECT telephone only supports connections with IP4WW-xxTXH telephones.
• Battery Capacity is 910 mAh, 2.4 V with a Talk Mode of 16 hours (typical) and a Standby Mode of

seven days (typical).

• The battery can be hot swapped while on a call. The battery must be replaced with another charged

battery pack within 20 seconds, otherwise the connection is lost.

• The handset has visual and audible indicators to warn of a low battery condition.
• When a message is received, the message icon is displayed.
• Synchronous Ringing does not apply to the cordless telephones.
• A beep indicates when the cordless telephone receives off-hook ringing.
• A spare battery is available as an Optional Available Part. A second battery is not shipped with the

product.

• The battery can be charged when it is installed in the handset or in the base charging unit and the

handset is in the charger. A stand-alone battery charger is not available.

• Environments with many metal parts, metal shelves, or metal buildings are known to reduce

cordless telephone performance.

ISSUE 2.0

SL1100

Features and Specifications Manual

1-185

C

Summary of Contents for SL1100

































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands