manualshive.com logo in svg

NEC SL1100, Features And Specifications Manual

Share
Download
NEC SL1100 Features And Specifications Manual Download Page 659

Secretary Call (Buzzer)

Description

Secretary Call lets two co-workers alert each other without disturbing their work. To have Secretary
Call, both co-workers must have Multiline Terminals with Secretary Call buzzer keys. When a user
presses their buzzer key, the system alerts the called extension by sending a splash tone and flashing
the called extension buzzer key. The called user can respond by placing an intercom call to the calling
party.

The called extension buzzer key continues to flash and the splash tone is heard until either user
cancels the Secretary Call. A secretary could use this feature, for example, to get a message through
to the boss in an important meeting. After being alerted, the boss could call the secretary when it is
most convenient.

An extension can have a Secretary Call key for any number of extensions, limited only by the available
number of programmable keys.

Conditions

• Secretary Call is not available to Single Line Terminal users.
• Secretary Call does not set up an Intercom call.
• When assigning Secretary Call, a user enters the associated extension numbers, not port numbers.
• Secretary Call requires a uniquely programmed function key.

Default Settings

Disabled

System Availability

Terminals

All Multiline Terminals

Required Component(s)

None

Related Features

Programmable Function Keys

ISSUE 2.0

SL1100

Features and Specifications Manual

1-647

S

Summary of Contents for SL1100

































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands