manualshive.com logo in svg

NEC SL1100, Features And Specifications Manual

Share
Download
NEC SL1100 Features And Specifications Manual Download Page 494

Program Number

Program Name

Default

10-50-02

License Information - License Quantity

0 ~ 32767

10-50-03

License Information - Campaign License Quantity

0 ~ 32767

10-50-04

License Information - Campaign License Remaining Days

0 ~ 9999

10-52-01

Free/Demo License Information - Remaining days of Free/Demo Li-
cense

0 ~ 9999

90-55-01

Free License Select - Start Free License

0

Table 1-49  License Information

License Code

License Name

Reset Re-

quired

Min

Max

Note

0003

SL-SYS-SL-NET LIC

 

On/Off

(V1.5 Added)

0007

SL-SYS-HOTEL LIC

 

On/Off

 

0030

SL-IP-ENCRYPTION LIC

 

On/Off

 

0042

SL-IP-CHANNEL-16 LIC

 

On/Off

 

1002

SL-VM-CHANNEL-2 LIC

 

1

16

 

1015

SL-VM-ADVANCE LIC

 

On/Off

 

2001

SL-SYS-INACD-LIC

 

On/Off

(V1.5 Added)

5001

SL-IP-SIPTRK-1 LIC

 

1

32

 

5111

SL-IP-SIPEXT-1 LIC

 

1

64

 

5201

SL-SYS-MOBILE-1 LIC

 

1

32

 

5102+5501+5505

SL-DT-DESKTOP SUITE-1 LIC

This license bundles Softphone
Client (5501), IP Port Softphone
only (5102), and Desktop Client
(5505).

 

1

64

(V1.5 Added)

Operation

There are four different ways to activate the licenses in the system:

Manual Enter Software Key Code

1.

In PRG 10-48-01 enter the Software Key Code.

2.

In PRG 10-48-02 enter the activation code.

3.

In PRG 10-48-03 enter the feature code(s) in the Software Key Code.

4.

In PRG 10-48-03 hit the Submit Softkey.

Manually Load the License File via the CF Card

1.

Manually register the software key.

2.

Save the License file to the CF Card.

3.

Install the CF Card onto the CPU.

4.

In PRG 10-49-01 assign to 1 and then hit transfer.

Multiple License files can be loaded at the same time.

SL1100

ISSUE 2.0

1-482

Licensing

L

Summary of Contents for SL1100

































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands