manualshive.com logo in svg

NEC SL1100, Features And Specifications Manual

Share
Download
NEC SL1100 Features And Specifications Manual Download Page 822

System Availability

Terminals

All Terminals

Required Component(s)

IP4WW-CFVM[ ]-C1

PZ-VM21

Related Features

Voice Response System (VRS)

Guide to Feature Programming

Program Num-

ber

Program Name

Default

90-02-01

Programming Password Setup - User Name

Refer to Programming Manual.

90-02-02

Programming Password Setup - Password

Refer to Programming Manual.

90-02-03

Programming Password Setup - User Level

Refer to Programming Manual.

Troubleshooting 

The table below shows possible Error messages and Causes:

Table 1-73  Error Messages and Causes

Error Message

Cause

VMDB is not attached

The PZ-VM21 is not attached.

Mailbox XXX does not exist.
(XXX = mailbox number)

The mailbox does not exist

The mailbox is being used by another session

When the mailbox is being used by another session, either PC or tel-
ephone.

There is no available space in the CF.

When there is no available space in the CF.

The file is being used by another session. Please try
again later.

When the file to be downloaded is being used by another session, ei-
ther PC or telephone.

The selected file has already been deleted.

When the file selected for download has already been deleted.

The file is being used by another session. Please try
again later.

When the file selected for deletion is being used by another session.

The selected file has already been deleted.

When the file selected for deletion has already been deleted.

Cannot upload the file since the original file is being
used by another session. Please try again later.

When the file to be replaced is being used when trying to upload the
replacement.

SL1100

ISSUE 2.0

1-810

Voice Response System (VRS) Upload Download Audio

V

Summary of Contents for SL1100

































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands