manualshive.com logo in svg

NEC SL1100, Features And Specifications Manual

Share
Download
NEC SL1100 Features And Specifications Manual Download Page 87

Built-in Automated Attendant 

Description

SL1100 provides Built-in Automated Attendant feature. This feature uses a PZ-VM21 mounted on the
CPU unit, but does not use a CF card. Voice prompts or messages are stored in a flash memory on
the CPU unit.

Conditions

• This feature uses a PZ-VM21 mounted on the CPU and supports a 2-port Built-in Automated

Attendant feature. Voice Mail features are not supported. To use the Voice Mail feature, VM CF
must be installed on the PZ-VM21.

• For fixed messages, 1 language is available in SL1100. Default language is “US English”.
• Call Routing Mailbox (maximum of 8) can be used for Built-in Automated Attendant.
• Automated Attendant (Operator Assistance) feature is not supported.
• Up to two ACD Delay Announcements are supported. (V1.5 or higher)
• ACD queue depth announcements are not supported when using Embedded VRS for ACD delay

Announcement. If enabled, the first ACD Delay Announcement repeats continuously. (V1.5 or
higher)

Default Settings

None

System Availability

Terminals

All Multiline Terminals, Analog telephone

Required Component(s)

PZ-VM21

Related Features

Automatic Call Distribution (ACD) (V1.5 or higher)

Voice Response System (VRS)

InMail - Automated Attendant

ISSUE 2.0

SL1100

Features and Specifications Manual

1-75

B

Summary of Contents for SL1100

































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands