manualshive.com logo in svg

NEC SL1100, Features And Specifications Manual

Share
Download
NEC SL1100 Features And Specifications Manual Download Page 819

Voice Response System (VRS) Upload

Download Audio

Description

The Voice Response System (VRS) Upload Download Audio feature allows the upload of VRS
greetings up to 1MB in size, recorded on a PC or professionally, to any valid VRS message in the
system. It also allows users to listen to and delete VRS messages from callers. Access to the
InMail/VRS compact flash drive is via the HTML User Pro (Web Pro).

The User Admin (UA Mode) can change Routing Mailbox greetings for the following Routing mailbox
types: Instruction (Call Routing), Announcement and Group.

Audio Prompt Format

In order for uploaded greetings to properly play on the CFVM[ ] CompactFlash they must be in the
proper format. Audio files not recorded in the proper format may not playback on the VRS/CFVM[ ]
CompactFlash. The proper format is:

Bit Rate

64kbps

Sampling Size

8 bits

Channel

1 (Mono)

Sampling Rate

8 KHz

Audio Format

CCiTT A-law/μ-law

User Pro Access

There are two different User Pro logins available to make changes to audio files on the InMail/VRS
CF, but only one allows changes to be made to VRS messages. To login, open an Internet browser
and enter the IP of the SL1100 LAN port in the address line. At default, the IP address is
192.168.0.10.

User Admin Mode (UA Mode)

: This mode allows the user admin to access any telephone and

mailbox in the system. This mode must be used to change VRS and Routing Mailbax greetings. At
default, the login ID is USER1 and the password is 1111.

The following details the page layout diagram of the two different User Pro login IDs:

ISSUE 2.0

SL1100

Features and Specifications Manual

1-807

V

Summary of Contents for SL1100

































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands