manualshive.com logo in svg

NEC SL1100, Features And Specifications Manual

Share
Download
NEC SL1100 Features And Specifications Manual Download Page 653

Save Number Dialed

Description

Save Number Dialed allows an extension user to save their last outside number dialed and easily
redial it later on. For example, an extension user can recall a busy or unanswered number without
manually dialing the digits. The system retains the saved number until the user stores a new one in its
place or clears the stored one.

Save Number Dialed saves in system memory a dialed number of up to 36 digits. The number can be
any combination of digits 0~9, # and 

*

. The system remembers the digits regardless of whether the

call was answered, unanswered or busy. The system normally uses the same trunk group as for the
initial call. However, the extension user can preselect a specific trunk if desired.

Conditions

• For systems with Automatic Route Selection, ARS selects the trunk for the call unless the user

preselects.

• Function keys simplify Save Number Dialed operation.

Default Settings

Enabled

System Availability

Terminals

All Stations

Required Component(s)

None

Related Features

Automatic Route Selection (ARS/F-Route)

Central Office Calls, Placing

Dial Tone Detection

Last Number Redial

Programmable Function Keys

Repeat Redial

ISSUE 2.0

SL1100

Features and Specifications Manual

1-641

S

Summary of Contents for SL1100

































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands