manualshive.com logo in svg

NEC SL1100, Features And Specifications Manual

Share
Download
NEC SL1100 Features And Specifications Manual Download Page 574

Paging, External (VRS)

Description

Paging, External (VRS) enables the use of prerecorded VRS messages for External Paging. The
advantage of this feature is saving time for the users who regularly use External Paging with the same
announcements.

Conditions

• If VRS External Paging is answered using the meet me paging service code and both parties are

connected, VRS stops the announcement.

• Paging, External (VRS) does not support Internal Paging. Also, combined paging is not supported.
• The paging telephone must remain off-hook during paging. If the paging telephone hangs up during

paging, VRS External paging stops.

• If an invalid VRS number is dialed or, there is no recorded VRS greeting, the caller hears an error

tone.

• Paging, External (VRS) will not play the starting and ending tone if enabled. If the starting and

ending tones are needed, they must be recorded in the VRS message itself.

• After the recorded VRS message is finished, the paging telephone hears a busy tone.
• When using the speaker mode on a paging telephone, the telephone becomes idle after the

recorded VRS message finishes.

• The Paging, External (VRS) feature is supported with Embedded VRS.

Default Settings

Disabled

System Availability

Terminals

All Terminals

Required Component(s)

PZ-VM21

InMail Compact Flash

CPU license for VRS

1- or 2-way amplifier and speakers (locally provided)

Related Features

Paging, External

Voice Response System (VRS)

SL1100

ISSUE 2.0

1-562

Paging, External (VRS)

P

Summary of Contents for SL1100

































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands