manualshive.com logo in svg

NEC SL1100, Features And Specifications Manual

Share
Download
NEC SL1100 Features And Specifications Manual Download Page 16

Cursor Key Operation (When set PRG 15-02-60:0)

By pressing the Right Cursor key, the user can access all directory menus. The flow chart below
shows the menu access sequence (refer to 

Figure 1-1 Right Cursor Key Operation Flow Chart on

page 1-4

). If the terminal is not allowed access to Speed Dial and/or Telephone Book numbers or

no telephone numbers are programmed in those areas, they are skipped.

Common speed
Dial Search

Group Speed
Dial Search

Extension
Number Search

Menu
Common SPD
Group SPD
Extension Number

Associated Program
PRG 13-01-03
PRG 13-02-01
None

Related Programs

If the menu is disable by programming or there are
no numbers in a telephone book the menu will be
skipped and the next menu will appear.

= Press Left Cursor key

Once the LEFT key is pressed, the Right Cursor
key can be used to switch between the Redial and
Incoming History menus.

Figure 1-1  Right Cursor Key Operation Flow Chart

Conditions

• Speed Dial bins can contain stored Account Codes. To prevent them from being displayed use PRG

20-07-04.

• ARS selects the trunk for the call unless selected by the user.
• A user can implement Speed Dial only if their extension has access to outgoing trunks.
• An extension can have a One-Touch Key for Speed Dial operation.
• If you enter a PBX trunk access code in a Speed Dial bin, the system automatically inserts a pause

after the bin.

• Single Line Terminals can dial only System and Group Speed Dial numbers.
• Toll Restriction may prevent a user from using a stored Speed Dial number.
• Unless selected by the user, Trunk Group Routing selects the trunk Speed Dial uses for trunk calls.
• If the Speed Dial bin does not have a name assigned it does not show when scrolling through the

directory of speed dials.

• If PRG 13-01-01 is set to 1 (Intercom Access mode), system speed dial bins require inserting a

trunk access code.

• When operating the Right Cursor key, if the menu is disabled by programming or there are no

numbers in a telephone book, the menu is skipped and the next menu will appear.

• If a name is not associated with a speed dial bin, the speed dial entry will not show up when

scrolling through the terminals Softkeys.

Default Settings

Available (No Speed Dialing bins are assigned).

SL1100

ISSUE 2.0

1-4

Abbreviated Dialing/Speed Dial

A

Summary of Contents for SL1100

































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands