manualshive.com logo in svg

NEC SL1100, Features And Specifications Manual

Share
Download
NEC SL1100 Features And Specifications Manual Download Page 148

Caller ID - Shared Logging

Description

The system can log records tied directly to an extension or one of 8 Caller ID logging groups.

Conditions

• By setting PRG 15-02-67: (1-8 shared group), all extensions in the same logging group can share

the same Caller ID records. When PRG 15-02-67 is set to (0: personal), extension base log records
are supported. Each extension or logging group can store a maximum of 50 records.

• When PRG 15-02-67: (1-8 shared group) is changed to (0: personal), Caller ID stored for the group

will be cleared.

• An extension in a Caller ID shared setting cannot store or refer it's own register for Caller ID

personal. Caller ID personal and Caller ID shared group are exclusive use.

• Caller ID indication displayed when toggled by pressing 

Help

 key is shown below.

Caller ID Number: 
Caller Name:        
Caller Number:           

ޓޓ

Time and Date of call:

ޓ

Answering extension Name:  
Group Name:                    
Soft Keys

ޓޓ

01
NEC Infrontia
2039265400
1-6 12:55
STA 200
Group01

ޓޓ

or

01:        NEC Infrontia

               1-6 12:55

 Call  Store  Del   More

01:           2039265400

Group01          STA 200

 Call  Store  Del   More

(This display indication is for IP and Multiline Terminals.)

Group Name is displayed when PRG 16-02-67 is set 1-8 and set group name at PRG 20-49-01.

Default Settings

None

System Availability

Terminals

All Multiline Terminals, Analog telephone

Required Component(s)

4COIDB-B1

2BRIDB-C1, 1PRIU-C1

SL1100

ISSUE 2.0

1-136

Caller ID - Shared Logging

C

Summary of Contents for SL1100

































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands