NEC ELECTRA ELITE IPK II, Features And Specifications Manual

Page: 463 / 996

Electra Elite IPK II Document Revision 1
Hold 2 - 441
Programming
11-12-30 Service Code Setup (for Service Access) - Specified Trunk Answer
If required, redefine the service code used to answer a specific trunk which is either ringing or on
hold (default: 672).
11-12-33 Service Code Setup (for Service Access) - Group Hold
If required, redefine the service code used to answer a specific trunk which is either ringing or on
hold (default: 732).
11-12-34 Service Code Setup (for Service Access) - Answer for Group Hold
If required, redefine the service code used to answer a specific trunk which is either ringing or on
hold (default: 762).
14-01-16 Basic Trunk Data Setup - Forced Release of Held Call
Enable (1) or disable (0) Forced Release of Held Call.
14-07-01 Trunk Access Map Setup
Set up the Trunk Access Maps. This sets the access options for trunks on Hold.
Trunk Access Maps: 1~200
15-02-06 Multiline Telephone Basic Data Setup - Hold Key Operating Mode
Set the function of the extension’s Hold key:
0 = System
1 = Exclusive
15-02-07 Multiline Telephone Basic Data Setup - Automatic Hold for CO Line
Determines whether an extension will automatically hold the trunk line (1) or disconnect it (0)
when you direct select a CO line without placing the call on hold first. Automatic Hold will not
work until the elapse call timer is displayed.
15-02-11 Multiline Telephone Basic Data Setup - Callback Automatic Answer
Determines whether an extension will answer (1) or not answer (0) a call that is recalled when
you go off-hook.
15-06-01 Trunk Access Map for Extensions
Assign Trunk Access Maps to extensions.
Trunk Access Maps: 1~200
15-07-01 Programmable Function Keys
Assign a function key for Exclusive Hold (code 45). If an extension has its fixed Hold key
reassigned (in Program 15-02-06), assign a function key for System Hold (code 44).