NEC ELECTRA ELITE IPK II, Features And Specifications Manual

Page: 848 / 996

Document Revision 1 Electra Elite IPK II
2 - 826 Tandem Trunking (Unsupervised Conference)
The line keys for the trunks light solid red.
To disconnect the Conference, use Forced Trunk Disconnect (i.e., Press line key +
∗
3 or the service code set of
Forced Trunk Disconnect in 11-10-26).
Single Line Telephone
To set up a Tandem Call:
1. Place or answer first trunk call.
2. Press hookflash.
3. Place or answer second trunk call.
4. To set up the tandem call, hang up.
This sets up a Conference between both outside parties.
To disconnect the Conference, use Forced Trunk Disconnect (i.e., Dial the trunk access code [#9 + trunk
number] +
∗
3 or the service code set of Forced Trunk Disconnect in 11-10-26).
Method D - Automatic Tandem Trunking Using Abbreviated Dialing
To set Automatic Tandem Trunking:
1. Dial service code 733 (or the service code set for Set Automatic Transfer per Trunk).
2. Dial the desired trunk number (Trunk Number: 001~-200).
3. Hang up.
The line key for the trunk will be solid red as long as the Unsupervised Conference continues.
To disconnect the Conference, Forced Trunk Disconnect (i.e., Press the line key or #9 plus the trunk
∗
3).
To cancel Automatic Tandem Trunking:
1. Dial service code 734 (or the service code set for Disable Automatic Transfer per Trunk).
2. Dial the desired trunk number (Trunk Number: 001~200).
3. Hang up.
To disconnect the Conference, Forced Trunk Disconnect (i.e., Press the line key or #9 plus the trunk *3
or the service code set of Forced Trunk Disconnect in 11-10-26).
To set and change the destination of the Automatic Tandem Trunk call:
1. Dial service code 735 (or the service code set for Set Destination for Automatic Trunk to Trunk
Transfer).
2. Dial the desired trunk number (Trunk Number: 001~200).
3. Dial the destination Number (trunk access code is not needed).