NEC ELECTRA ELITE IPK II, Features And Specifications Manual

Page: 239 / 996

Electra Elite IPK II Document Revision 1
Code Restriction Override 2 - 217
Code Restriction Override
Description
Code Restriction Override lets a user temporarily bypass an extension’s Code Restriction. This helps a
user that must place an important call that Code Restriction normally prevents. For example, you could
set up Code Restriction to block 900 calls and then provide a Code Restriction Override code to your
attendant and executives. When the attendant or executive needs to place a 900 call, they just:
J
Press the Speaker key, dial a service code and enter their override code.
J
Press the Speaker key and dial a trunk access code (e.g., 9 or #9 002).
J
Place the 900 call without restriction.
You can assign a different Code Restriction Override code to each extension. Or, extensions can share
the same override code.
Code Restriction Override will override
all
Code Restriction programming. Walking Code Restriction
allows you to assign a Code Restriction level for each user. When a call is placed using Walking Code
Restriction, the restriction for the call is based on the Code Restriction level defined in Programs 21-05-
xx and 21-06-xx.
Conditions
Off-Premise notification and external extensions require access to outside lines.
In the Class heading in the SMDR report, POTA indicates that the call was placed using
Code Restriction Override.
Code Restriction Override and Walking Code Restriction temporarily overrides an
extension’s Code Restriction.
If the system has VRS, users hear, “Your call cannot go through. Please call the operator”
when they dial a number that Code Restriction prevents.
Default Setting
Disabled