NEC ELECTRA ELITE IPK II, Features And Specifications Manual

Page: 603 / 996

Electra Elite IPK II Document Revision 1
Message Waiting 2 - 581
Related Features
Handsfree Answerback/Forced Intercom Ringing
Hotel/Motel
Programmable Function Keys
Voice Mail
Voice Response System (VRS)
Programming
15-02-28 Multiline Telephone Basic Data Setup, Message Wait LED
This option allows you to select whether the Message Wait LED located at the top of the
multiline terminal will flash green (0) or red (1) when a Message Wait indication is flashing. Note
that if this LED is also used for voice mail indications (no Programmable Function Key
programmed for voice mail), if there are both voice mail messages and Message Wait
indications, the color set for Message Wait will override the color used for voice mail indications
(red).
15-07-01 Programmable Function Keys
Assign a function key for Message Waiting (code 38).
20-06-01 Class of Service for Extensions
Assign a Class Of Service (1~15) to an extension.
20-13-07 Class of Service Options (Supplementary Service) - Message Waiting
In an extension’s Class of Service, enable (1) or disable (0) an extension’s ability to leave
Messages Waiting.
24-02-05 System Options for Transfer - Message Wait Ring Interval Timer
For single line telephones without message waiting lamps, this timer determines the amount of
time between intermittent ringing. If this timer is set to '0' then the system rings once.
80-01-01 Service Tone Setup - Message Wait Dial Tone
If the default tone is not acceptable for the Message Wait Dial Tone, a new tone can be
assigned.