NEC ELECTRA ELITE IPK II, Features And Specifications Manual

Page: 37 / 996

Electra Elite IPK II Document Revision 1
Account Code Entry 2 - 15
5. Dial the number you want to call.
If you hear “stutter dial tone after dialing the number, ARS is requesting that you enter an Automatic Route
Selection Authorization Code. Refer to
Automatic Route Selection on page 2-65 for more information.
To enter an Account Code for an incoming call:
This procedure is not available for single line telephones.
1. Answer incoming call.
If Account Codes for Incoming Calls is disabled, the following steps will dial digits out onto the connected trunk.
2. Dial , .
3. Enter the Account Code.
You can enter any code of the proper length. Incoming Account Codes cannot be Forced or Verified.
4. Dial , .
To enter an Account Code while placing a trunk call:
If your system has Forced Account Codes, you must follow this procedure.
1. Access trunk for outside call.
You can access a trunk by pressing a line key or dialing a code. Refer to Central Office Calls, Placing on page
2-171 for more information.
2. Dial , .
3. Dial your Account Code (1~16 digits, using 0~9 and
#
).
4. Dial , .
5. Dial number you want to call.
If you hear “stutter” dial tone after dialing the number, ARS is requesting you to enter an ARS Authorization
Code. Refer to the
Automatic Route Selection on page 2-65 feature for more information on ARS Authorization
Codes.