NEC ELECTRA ELITE IPK II, Features And Specifications Manual

Page: 869 / 996

Electra Elite IPK II Document Revision 1
Transfer 2 - 847
22-04-01 Incoming Extension Ring Group Assignment
Assign extensions to ring groups.
22-05-01 Incoming Trunk Ring Group Assignment
Define a trunk’s ring group. When transferring a DID or trunk call to the trunk’s defined ring
group, the trunk will then ring the defined extensions for the ring group.
22-08-01 DIL/IRG No Answer Destination
Assign the DIL No Answer Ring Group to which an unanswered call should overflow.
0 = No Setting
1~100 = Incoming Groups
102 = In-Skin/External Voice Mail
103 = Centralized Voice Mail
24-02-01 System Options for Transfer - Busy Transfer
Prevent (0) or allow (1) extensions to transfer calls to busy extensions. If disabled, calls
transferred to busy extensions recall immediately.
24-02-03 System Options for Transfer - Delayed Call Forwarding Time
If activated at an extension, Delayed Call Forwarding occurs after this interval (0~64800
seconds). This also sets how long a Transferred call waits at an extension forwarded to Voice
Mail before routing to the called extension’s mailbox.
24-02-04 System Options for Transfer - Transfer Recall Time
Set the Transfer Recall Time (0-64800 seconds). An unanswered transferred call recalls to the
extension that initially transferred it after this interval. This interval also sets how long a
transferred call camps-on to a busy extension.
24-02-05 System Options for Transfer - Transfer to Busy Department Group Recall Timer
After a trunk is unscreen transferred to a busy Department Group, this timer will start. If the call
is not answered, it will recall the originator (0~64800 seconds).
25-06-02 VRS/DISA One-Digit Code Attendant Setup
Define the digit to be used by a VRS caller which will allow their call to be transferred to the
external page.
31-05-01 Universal Night Answer/Ring Over Page
For each trunk which should ring the external page, set the External Page zone (1~9) to allow
ringing (1).
81-10-07 COIU Initial Data Setup - Flash (Hooking 1)
Set the flash duration for analog trunk calls (1~255 in 16 ms steps).