NEC ELECTRA ELITE IPK II, Features And Specifications Manual

Page: 311 / 996

Electra Elite IPK II Document Revision 1
Direct Inward Dialing (DID) 2 - 289
When ordering DID service, provide the Telco with the following information:
Conditions
Analog DID requires the installation of a DID(4)-U10 ETU (provides four DID ports).
Depending on programming, the system may assign both trunk and extension ports (if OPX
is selected in Program 10-03-01) when this ETU is installed.
DID service must be purchased from your local telephone company.
DID Intercept for each DID number works for DID trunks with a trunk service type 3 in
Program 22-02. Other types of trunks may use the DID table, but the DID intercept feature
for each DID number is not yet supported.
T1 or PRI DID requires a DTI-U40 ETU.
When a call is transferred because of Call Forwarding No Answer, Call Forwarding Busy, or
DND, the reason for Transfer option can display to the transferred extension when the call
is ringing to their telephone.
Direct Inward Lines (DILs) also provide a way for outside callers to dial a system extension,
virtual extension, or Department Group directly.
DISA also allows outside callers to dial system extensions directly.
The off-hook Signaling provide DID calls with signaling options. Refer to Off-Hook
Signaling for specific details.
DID trunks will not ring external page speakers. Only trunks defined as “normal” in
Program 22-02-01 will ring external page speakers.
To simplify answering DID calls, assign function keys as line keys for the DID trunks.
SMDR can print trunk port names or received dialed number for ANI/DNIS or DID trunks. If
enabled, DNIS digits can be printed on the SMDR reports instead of the trunk name.
Transferred calls on DISA, DID, DIL, ISDN trunks, or from the VRS can display the reason
a call is being transferred (Call Forward, Busy, No Answer, or DND).
Electra Elite IPK II
KF = US:NIFKF07B
MF = US:NIFMF07B
PF = US:NIFPF07B
DID Facility Interface Code 02RV2-T
DID Service Order Code 9.0F
DID Answer Supervision Code A S.2
DID USOC Jack Type RJ21X