NEC ELECTRA ELITE IPK II, Features And Specifications Manual

Page: 891 / 996

Electra Elite IPK II Document Revision 1
Unified Messaging 2 - 869
Programming
10-09-01 DTMF and Dial Tone Circuit Setup
Assign at least one circuit for DTMF reception (type 0 or 1). Use the following as a guide when
allocating DTMF receivers:
H
In light traffic sites, allocate one DTMF receiver for every 10 devices that use them.
H
In heavy traffic sites, allocate one DTMF receiver for every five devices that use them.
11-07-01 Department Group Pilot Numbers
Assign a Department Group pilot number for the Voice Mail (8 digits maximum). The extensions
are assigned to the group in Program 16-02-01.
15-02-26 Multi-Line Telephone Basic Data Setup, MSG Key Operation Mode
Determine whether an extension’s MSG key should function as a Message key (0) or Voice Mail
key (1) (default = 0). If set as a Message key, the user will be able to press the key to call the
voice mail only when they have new messages. If set as a Voice Mail key, it will function as a
normal Voice Mail key (it will not be active if Centralized Voice Mail is used).
15-02-08 Message Waiting LED Color
This option allows you to select whether the Message Wait LED located at the top of the
multiline terminal will flash green (0) or red (1) when a Message Wait indication is flashing. By
default, this option is set to "1" (red).
15-03-01 Single Line Telephone Basic Data Setup - SLT Signaling Type
For each Electra Elite IPK II voice mail extension, this option must be set to “0”.
15-03-03 Single Line Telephone Basic Data Setup - Terminal Type
Set all SLIU ports used for Voice Mail as type 1.
15-03-09 Single Line Telephone Basic Data Setup - Caller ID Function for External Module
This option must be set to ‘0’ when voice mail is used or the integration code for the disconnect
function will be incorrect.
15-07-01 Programmable Function Keys
Assign a Voice Mail key to an extension. You must enter the Voice Mail key code (code 77)
followed by:
H
Your own extension number if you are setting up your own Voice Mail key.
H
A virtual extension number if you are setting up a Message Center key for a virtual extension.
H
A co-worker’s extension number if you are setting up a Message Center key for an installed
extension.
H
An uninstalled extension’s number if you are setting up a Message Center key for an uninstalled
extension.
H
(Optional) Assign a Voice Mail Record key to an extension (code 78).
H
(Optional) Assign a Personal Answering Machine Emulation key (code 16).
H
(Optional) Use a Call Redirect key (49) to allow a user to transfer a call to another extension or
voice mail without answering the call.