NEC ELECTRA ELITE IPK II, Features And Specifications Manual

Page: 227 / 996

Electra Elite IPK II Document Revision 1
Code Restriction 2 - 205
Code Restriction
Description
Code Restriction limits the numbers an extension user may dial. By allowing extensions to place only
certain types of calls, you can better control long distance costs. The system applies Code Restriction
according to an extension’s Code Restriction Class.
The system allows for up to 15 Code Restriction
Classes and 416 extensions
.
Conditions
If a Code Restriction Class has the same entries in both a permit and restriction table, the
system does not restrict the call.
Code Call Digit counting may prevent users from taking advantage of long distance
automated services like ACD and automated Technical Service.
Code Restriction is applied when accessing ARS.
If Program 21-01-10 is programmed with an entry other than “0”, a call will not have a talk
path unless the user dials at least the number of digits entered in this option when placing
an out going call. This means that an entry of 4 or higher in this program will cause a
problem when dialing 911. Since it is only a 3-digit number, the call will not have a talk path,
preventing the emergency dispatcher from hearing the caller. It is recommended that this
option be kept at its default setting of “0” to prevent any problems with dialing 911.
Common Permit Code Table
Use the Common Permit Code Table when you have numbers you want all Code
Restriction Classes to dial. To let all users dial 911, for example, put 911 in the Common
Permit Code Table. The Common Permit Code Table overrides the Restrict Code and
Common Restrict Code Tables. The system provides 10 tables, with 10 entries in each
table. Each code is 4 digits maximum, using 0~9, #,
∗
and the Recall key (as a wild card).
Common Restrict Code Table
The Common Restrict Code Table lets you globally restrict certain numbers for all Code
Restriction Classes. To prevent all users from dialing directory assistance (411), for
example, put 411 in the Common Restrict Code Table. Be sure you do not allow the codes
you want to restrict in the Permit Code Table or the Common Permit Code Table. The
system provides 10 tables, with 10 entries in each table. Each code is four digits maximum,
using 0~9, #,
∗
and the Recall key (as a wild card).