NEC ELECTRA ELITE IPK II, Features And Specifications Manual

Page: 147 / 996

Electra Elite IPK II Document Revision 1
Call Forwarding - Park and Page 2 - 125
31-02-01 Internal Paging Group Assignment – Internal Paging Group Number
Assign extensions to Internal Paging Groups (i.e., Page Zones).
31-03-01 Internal Paging Group Settings
Assign names to Internal Paging Groups (i.e., Page Zones). The system shows the names you
program on the telephone displays.
31-04-01 External Paging Zone Group
A
ssign each External Paging Speaker to an External Paging Zone.
31-06-01 External Speaker Control – Broadcast Splash Tone Before Paging
Use this option to enabled or disable splash tone before Paging over an external zone. If
enabled, the system broadcasts a splash tone before the External Paging announcement.
The paging chime will override the first four seconds of the announcement. Allow a delay in announcement
recording for chime time.
31-06-02 External Speaker Control – Broadcast Splash Tone After Paging
Use this option to enabled or disable splash tone after Paging over an external zone. If enabled,
the system broadcasts a splash tone at the end of an External Paging announcement.
40-10-01 Voice Announcement Service Option – VRS Fixed Message
Enable (1) or disable (0) the system’s ability to play the fixed VRS messages (such as “You have
a message.”).
40-10-05 Voice Announcement Service Option – Park and Page Repeat Timer
If a Park and Page is not picked up within this interval, the Paging announcement repeats.
Operation
To have the system page you when you have a call:
1. Press the Speaker key (or lift the handset at the single line telephone) and dial 713.
2. When you hear, “Please start recording,” record you Personal Greeting.
If you already have Park and Page or Personal Greeting set up, you can dial:
3 to erase (the optionally HOLD to cancel the erase)
5 to listen (then # again to listen again)
7 to re-record
3. Dial #7.
4. When you hear, “Please start recording,” record your page and dial # when the announcement is
complete.
A paging chime will override the first four seconds of an announcement. Allow a delay in announcement
recording for chime time.