NEC ELECTRA ELITE IPK II, Features And Specifications Manual

Page: 651 / 996

Electra Elite IPK II Document Revision 1
One-Touch Calling 2 - 629
One-Touch Calling
Description
One-Touch Calling gives a multiline terminal user one-button access to extensions, trunks, speed dial
bins and selected system features. This saves users time when accessing co-workers, clients and
features they use most often. Instead of dialing a series of codes, the user need only press the One-
Touch key. An extension user can have One-Touch keys programmed for:
J
Direct Station Selection - one-button access to extensions
J
Station Speed Dial - one-button access to stored numbers (up to 24 digits long)
J
Speed Dial– System/Group/Station - one-button access to stored speed dialing numbers
J
Trunk Calling - one-button access to trunks or trunk groups
J
Service Codes - one-button access to specific Service Codes
An extension user can chain dial with One-Touch Keys. For example, a user can store the number for a
company’s Automated Attendant in key 1 and employee extension numbers in keys 2~5. The user
presses key 1 to call the company, then one of keys 2~5 to ring the employee to which they want to
speak.
An extension user or system administrator can optionally store a Flash command under a One-Touch
key. This is helpful for One-Touch Keys used as Station Speed Dial bins. The stored Flash may be
helpful to access features of the connected Telco, PBX or Centrex.
Conditions
One-Touch keys provide a Busy Lamp Field (BLF).
Default Setting
None