NEC ELECTRA ELITE IPK II, Features And Specifications Manual

Page: 517 / 996

Electra Elite IPK II Document Revision 1
IPK II In-Mail 2 - 495
An outside caller can route to a Master Mailbox or Routing Mailbox programmed as a Directory Dialing
Mailbox from:
J
The Answer Table’s Answer Schedule Override mailbox, Default mailbox, or Routing mailbox.
J
A GOTO action in the Dial Action Table of a Call Routing Mailbox.
In-Mail: Multiple Greetings
The mailbox subscriber can record up to three separate greetings and make any one of the three active.
When a caller leaves a message in the subscriber’s mailbox, they hear the active greeting. This allows
the subscriber, for example, to record separate greetings for work hours, after work, and during vacation.
Instead of rerecording their greeting when they leave the office, they can just activate the “after work”
greeting instead.
If the active greeting has not been recorded, a caller leaving a message in the subscriber mailbox will
hear, “
At the tone, you can leave your message for (extension number or name).
”
Refer to the Electra Elite IPK II In-Mail System Guide for complete details on setting these features.
Conditions
The Park and Page feature is not available with In-Mail.
Conversation Record will not work for monitored calls.
Fixed Call Forwarding can be used to transfer a user’s unanswered calls to their voice mail.
Call Forwarding does not have to be programmed manually by every user.
Caller ID information will be passed from the Voice Mail to an extension for pre-answer
display on an unscreened transfer from Voice Mail.
Off-premise notification and external extensions require access to outside lines.
To have the Voice Mail Automated Attendant answer a trunk, program the trunk as a DIL to
a Voice Mail port.
When the voice mail places a call on hold, it uses Group Hold. Any line appearances for the
trunk will show the hold flash rate, however, users will not be able to pick up these calls (a
busy signal will be heard).
Updating the system time will also update the In-Mail time.
Both 2- and 4-port In-Mail systems use eight station ports.
VRS Features and Intramail do not work at the same system.
DSPDB has 32 resources which are used for DT/DTMF/Caller ID receiver or Caller ID
sender. However, when using In-Mail they do not work.
In-Mail and VMS/FMS/VMP/CTI/CTP cannot be used at the same time in the same system.