Miyachi LMV1000, User Manual

Page: 57 / 259

Operation with the Touch Panel
LMV1000 (G)(E) AIR-COOLED LASER MARKER
6-10 990-541
c. Y axis
Used to set the absolute origin in the Y-axis direction.
d.
ș
axis
Used to set the angle of the absolute origin in the counterclockwise direction.
6. Jump / Shutter Screen
Sets the jump timing for opening / closing the
shutter. The term “Jump” defines how the laser
moves from the end point of one object mark to
the start point of the next object.
a.
Safety shutter control
INTRLOCK The safety shutter is controlled by the marking start signal.
Firm OP The safety shutter is always open when the LD is turned on.
b. Jump speed
Defines how fast the mirrors change position from the end point of one character to the starting
point of the next character.
c. Wait after Jump
Sets the marking wait time after a jump.
d. Open DLY Time
Defines when the laser output begins after the jump wait period.
e. Close DLY Time
Defines when the laser output ends after a mark.