Miyachi LMV1000, User Manual

Page: 170 / 259

7: OPERATION WITH A PC
LMV1000 (G)(E) AIR-COOLED LASER MARKER
990-541 7-87
R
(arc) command R=X,Y,I,J,D
Draws an arc from the current point to a designated point (X, Y) around center position (I, J).
The direction (D) is clockwise when D = 0, or counterclockwise when D = 1. If the current
positions are specified, a circle will be drawn. If there is a distance difference in center
positions between the current position and designated position, the start point will not be
continuous because the arc radius is calculated from the center position (I, J) and designated
position (X, Y).
Laser parameter commands, etc.
i. Laser parameters, shutter timing, etc. are specified.
ii. Example creation of element data.
Example 1: Module (Example: Height = Width = 100)
As shown below, the registered graphic is symmetric with respect to the origin.
;
:
,
.
.
.
.
,
.
.
.
.