Miyachi LMV1000, User Manual

Page: 169 / 259

7: OPERATION WITH A PC
LMV1000 (G)(E) AIR-COOLED LASER MARKER
7-86 990-541
Micro QR code
5. Creating QR element data
a. Basic operation
Register the following QR code elements as individual graphic data:
Position detection
pattern
,
Module
and
Quiet zone
. Then generate QR code graphic data based on the individual
graphic data elements. This method defines the 2-dimensional alignment information.
NOTE:
Quiet zone
is required only when
Reverse ON
is selected. Defining the
Position
detection pattern
is a matter of preference and is not required.
b. QR code elements
The
Position detection pattern
,
Module
and
Quiet zone
are created with commands in the
graphic creation program.
c. Command Descriptions
J
(jump) command J=X,Y
Jumps (without drawing a line) from the current position to a designated position (X, Y). The
next command is executed with respect to the latter point (reference point).
The current graphic data position is preset at point (0, 0). If multiple graphic data files are
marked, then the mark will begin from the last coordinate position marked.
L (line) command L=X,Y
Draws a line from the current position to a designated position (X, Y).
S
(intersection removal start point) command S=X,Y
Same as (b) except that the intersection start point is removed.
E
(intersection removal end point) command E=X,Y
Same as (b) except that the intersection end point is removed.