Miyachi LMV1000, User Manual

Page: 18 / 259

LMV1000 (G)(E) AIR-COOLED LASER MARKER
990-541 2-1
CHAPTER 2
FEATURES
Throughout the rest of this manual, the LMV1000 (G) and LMV1000 (G)(E) (ML-7110A and ML-
9000A) Laser Markers will simply be referred to as
the Marker . These Markers use a scan head to steer
the output beam of an LD-pumped Nd:YVO
4
laser crystal.
YVO
4
Laser Marker
x
Permanent marking
Unlike ink, the marking is permanent because the laser beam changes the material itself.
x
Environment friendly
No solvent is needed because no ink is used. Recycling the material is easy because it is not
blended with ink.
x
Fine letters and fine pictures
Fine marking is easily possible. It is optimal for marking on minute parts.
x
Non-contact marking
Marking onto a curved or concave plane is possible.
LMV1000 (G)(E)
(ML-7110A(-CE) & ML-9000A(-CE))
Laser
Marker
x
Compact and lightweight
Easily fits into a production line with limited space.
x
Low power consumption
The Marker uses high- efficiency laser diodes, resulting in low power consumption.
x
Completely air- cooled
No water is needed to keep the unit cool.
x
Windows-supported (when a PC is connected)
Since the main program runs on Windows , it is easy to create and register figure data (created
by a commercial CAD software) as marking data. ( Windows is registered trademark of the
Microsoft Corporation, U.S.A.)
x
High-speed marking
300 characters per second (with a 294 mm-by-294 mm marking field).