Miyachi LMV1000 User Manual Download Page 117

Page: 117 / 259

7: OPERATION WITH A PC

LMV1000 (G)(E) AIR-COOLED LASER MARKER

7-34

990-541

Layout file deletion

From the file list (work folder contents),
select a file to delete.

NOTE:

In order to delete the file, it must

not

be opened.

CAUTION

Files (layout, graphic, parameters) created by the user are controlled by
working folders on the setup screen.

NOTE:

The number of files created in a work folder depends on the

limit of OS(operating System)

Work Folder

Graphic, parameter, secondary code, bar code and other dependent

files used in the layout are simultaneously copied or transferred during a
file copy or when transferring a file to the control unit.

Summary of Contents for LMV1000




































































































































































































































































Search results

Summary of Contents for LMV1000

Reviews:

Related manuals for LMV1000

Brands by name

Popular brands

Miyachi LMV1000, User Manual

Search results

Summary of Contents for LMV1000

Reviews:

Related manuals for LMV1000

Brands by name

Popular brands