Miyachi LMV1000, User Manual

Page: 53 / 259

Operation with the Touch Panel
LMV1000 (G)(E) AIR-COOLED LASER MARKER
6-6 990-541
2. Bold Line Function Screen
a.
Boldline Fn
None
Marks with a single laser beam.
STNDRD
Used to draw a thick line. This is accomplished by marking multiple
thin lines in a back and forth motion.
Hi-QUAL
Used to draw a thick line. This is accomplished by marking multiple
thin lines in the same direction.
Wobble
Creates a line by marking a spiral pattern.
b. Contour correction
When the thick line function is used, the shape of the mark can be adjusted where lines
intersect sharply.
ON
Truncates the corners of a character or figure
based on the width of marked line.
OFF Doesn’t perform contour correction.
c. Bold
Sets the line width of the mark.
d. Line CNT
Sets the number of laser beam passes used to draw a thick line. Set to an even number. If an
odd number is entered, the number of passes will still be even (this is accomplished by
automatically adding one to the odd value).
. K PG
Y K FV J