METRODATA LTD
WCM1100 / WCM3100 / WCM-Serial / LHM1000 / LVM2000 User Manual
76-02-082 Rev N
56 of 169
5.1.10.5 Input Config
The input configuration menu item allows a configuration file to be loaded onto the WCM
unit using the serial port. The configuration file for use may have been generated using
either the serial output configuration option, or have been saved via TFTP.
To load the configuration file, the terminal emulator application must be capable of sending
a text file to the serial port.
Selecting the Input Config menu item leads to the following prompt
Send file. Esc to End
At this point, send the text file and once it is complete type <ESC> to terminate the
transfer. At this point, the WCM will validate the configuration and then reboot using the
new configuration.
Please note, that with some terminal emulation packages, if error messages are
encountered, it may be necessary to set the character delay to 10mS
