METRODATA LTD
WCM1100 / WCM3100 / WCM-Serial / LHM1000 / LVM2000 User Manual
76-02-082 Rev N
126 of 169
5.5.3.4 Routing Table
Where management frames are destined for IP subnets that are not part of the local
subnet, a router must be used. To assist the manager in understanding how to route
frames to remote subnets, the IP routing table gives directions on how to reach each
remote destination.
The routing table with a default route added automatically by DHCP is shown below:
Metrodata WCM3100 "" Alarms: Major
Destination Next Hop I/f Type Prot. Age Mask
-----------------------------------------------------------------------------
192.168.100.0 0.0.0.0 Mgmt direct local 1653 255.255.255.0
0.0.0.0 192.168.100.113 Mgmt indirect local 1653 0.0.0.0
A - add entry
D - delete entry
any other key to exit:
5.5.3.4.1 Add a new Route
To add a new route, simply select Add Entry, and then enter the remote subnet, net mask
and next hop router address as shown below:
Metrodata WCM3100 "" Alarms: Major
Destination Next Hop I/f Type Prot. Age Mask
-----------------------------------------------------------------------------
192.168.100.0 0.0.0.0 Mgmt direct local 1772 255.255.255.0
0.0.0.0 192.168.100.113 Mgmt indirect local 1772 0.0.0.0
A - add entry
D - delete entry
any other key to exit:
Add route.
Destination: 192.168.0.0
Mask: 255.255.255.0
Next-hop: 192.168.100.229
Metrodata WCM3100 "" Alarms: Major
Destination Next Hop I/f Type Prot. Age Mask
-----------------------------------------------------------------------------
192.168.100.0 0.0.0.0 Mgmt direct local 1877 255.255.255.0
0.0.0.0 192.168.100.113 Mgmt indirect local 1877 0.0.0.0
192.168.0.0 192.168.100.229 Mgmt indirect local 0 255.255.255.0
A - add entry
D - delete entry
any other key to exit:
