METRODATA LTD
WCM1100 / WCM3100 / WCM-Serial / LHM1000 / LVM2000 User Manual
76-02-082 Rev N
33 of 169
4.3 Logging onto WCM
The initial access to the WCM must use a terminal connected to the terminal port.
The WCM has a password protected, menu driven user interface. When a management
session is connected to the WCM, the welcome banner will be displayed as shown:
Metrodata WCM1100:
Local connection to “”
Password (‘view’ to view only) :
or
Metrodata WCM3100:
Local connection to “”
Password (‘view’ to view only) :
or
Metrodata WCM-Serial: Local connection to “”
Password (‘view’ to view only) :
or
Metrodata LHM1000:
Local connection to “”
Password (‘view’ to view only) :
or
Metrodata LVM2000:
Local connection to “”
Password (‘view’ to view only) :
At the prompt, enter the password to gain access to the WCM. The default password is
the product name, ie “wcm1100”, “wcm3100”, “wcm-serial”, “lhm1000” or “lvm2000”. For
security, the password is obscured with an asterisk (*) being displayed for each character
typed. An incorrect password will lead to the welcome banner being redisplayed. A
correct password will lead onto the main set up menu as shown below:
Metrodata WCM3100 "" Alarms: Major
MAIN SET-UP
Global status <display>
alarm eXtension <menu>
Operational Modes <menu>
Port set-up <menu>
V.24 set-up <menu>
Management Entity <menu>
System <menu>
Update EEPROM
circuit/flow Tests <menu>
performance Data <menu>
First CAPITAL - select item
