METRODATA LTD
WCM1100 / WCM3100 / WCM-Serial / LHM1000 / LVM2000 User Manual
76-02-082 Rev N
146 of 169
5.7 Global Status
The Global status screen gives an overview of the status of the WCM unit, and should
always be the first port of call when attempting to diagnose a network, or operational
problem.
The Global Status screen is shown below:
Metrodata WCM3100 "" Alarms: Major
GLOBAL STATUS History last cleared:
------------- -
Mgmt IP Address: 192.168.100.39
Mgmt Net-mask: 255.255.255.0
MAC Address: 00:c0:81:00:14:55
Mgmt C-VLAN: -
Mgmt S-VLAN: -
VLAN Mode: C-VLAN
VLAN
Interf St Test Alarm Mode Speed Duplex Alloc
-------------------------------------------------
LAN1 Up - LKDN Auto - - U,1..
LAN2 Up - OAM Auto 1000M Full U,1..
SFP Up - NF U,1..
VCG Up - OAM U,1..
WAN Up - LOS
<Esc> - exit, C - clear, <Enter> - refresh
Selecting C at any time will clear the screen and clear lower case historic alarms but will
leave current alarms displayed. The time of the clearing
The global status screen separates into 2 main areas of interest. The first section details
the management entity configuration, including IP address and any tagging requirements.
The second section gives an overview of the various ports in the unit
5.7.1 Interface
The interface column lists the various interface ports in the system.
5.7.2 State
The state column lists the administrative state for each of the interfaces.
