METRODATA LTD
WCM1100 / WCM3100 / WCM-Serial / LHM1000 / LVM2000 User Manual
76-02-082 Rev N
35 of 169
4.4 Configure the WAN interface
In order for two WCM units to communicate they must be connected using the WAN port.
The WAN interface must be configured to match the network NTU configuration.
The WAN port is configured by selecting the Port Set-Up Menu,
Metrodata WCM1100 "" Alarms: Major
PORT SET-UP
lan1 <menu>
lan2 <menu>
SFP <menu>
VCG <menu>
WAN <menu>
First CAPITAL - select item
<escape> - exit menu
4.4.1 WCM1100 E1 Configuration
Metrodata WCM1100 "" Alarms: Major
WAN
State Up
Interface E1 Unbal (BNC)
Timing Internal
rx sEnsitivity Short-haul
Framing Framed
crc-4 Enabled
sigNalling Disabled
First CAPITAL - select item
<escape> - exit menu
Ensure that the interface, timing and framing modes are correctly set to match the network
NTU settings.
