METRODATA LTD
WCM1100 / WCM3100 / WCM-Serial / LHM1000 / LVM2000 User Manual
76-02-082 Rev N
41 of 169
To change the IP settings for installation:
DHCP
For operation in a DHCP enabled network and automatic
IP address allocation set this parameter to ON to enable
DHCP address allocation.
IP Address
If DHCP is not used, you must manually assign the
required IP address for correct installation into the
network. (Note the default IP address is set to
169.254.42.42)
Net mask
If DHCP is not used, you must assign the required network
mask for correct installation into the network.
4.6 Set Default Route
From the Main Setup Menu, select Management, then IP,
Metrodata WCM3100 "" Alarms: Major
IP
default TTL 32
DSCP priority 0
default Gateway none
Routing table <display>
Forwarding Disabled
Stats. <display>
First CAPITAL - select item
<escape> - exit menu
Now select Default Gateway and enter the IP address of the gateway router.
Note, that the default route will be added automatically if DHCP is enabled.
