METRODATA LTD
WCM1100 / WCM3100 / WCM-Serial / LHM1000 / LVM2000 User Manual
76-02-082 Rev N
143 of 169
5.5.8.1.1.4 Get Configuration File
If a configuration file exists on a central server it may be loaded onto a unit using TFTP
through the Get Config menu option. At the prompt enter the required filename.
Enter file name, then wait
> wcm3100.cfg
Once the file has downloaded, the unit will save it to the non volatile EEPROM and will
then reboot and restart with the new configuration file loaded.
5.5.8.1.1.5 Put Configuration File
When a WCM unit has been configured, the configuration file may be saved to a central
server using TFTP. To store the configuration file, select Put Config and then enter the file
name when requested:
Enter file name, then wait
> wcm3100.cfg
Transfer complete. Any key to continue.
5.5.8.1.1.6 put Report
For units that support SAM service validation tests, the put report option will allow the
generated service birth certificate to be uploaded. This is not supported on the WCM
units.
5.5.8.1.2 Server Mode
Select SERVER mode to display the menu as below:
Metrodata WCM "" Alarms: Major
TFTP
Mode Server
remote IP 192.168.100.70
Software file name software
Config. file name config
First CAPITAL - select item
<escape> - exit menu
