Mazda 626 Station Wagon, Workshop Manual

Page: 374 / 577

OUTLINE
OUTLINE
OUTLINE OF CONSTRUCTION
• The construction and operation of the conventional braking system and ABS of the face-lifted 626 (GF) and
626 Station Wagon (GW) is essentially carried over from that of the current 626 (GF) and 626 Station Wagon
(GW). (See 626 Training Manual 3303-10-97D, 626 Workshop Manual 1577-10-97D, 626 Station Wagon
Workshop Manual Supplement 1603-10-97J, 626, 626 Station Wagon Workshop Manual Supplement
1614-10-98D, and 626, 626 Station Wagon Workshop Manual Supplement 1668-10-99C.) However, the
following have been changed.
— Rear brake (drum) has been changed.
— Disc plate and Pad have been changed.
— For R.H.D. ABS and TCS models, New ABS HU/CM (ABS/TCS HU/CM) has been adapted (same as
L.H.D. models)
SPECIFICATIONS
Item
Specification
SEDAN, 5HB
WAGON
FP, FS, FS
(Hi-power)
engine model
RF Turbo
engine model
Brake pedal
Type Suspended
Pedal lever ratio 3.7
Max. stroke (mm {in}) 116 {4.57}
Master cylinder
Type
Tandem (with level sensor)
ABS model: Port-less, Non ABS model: Conventional
Cylinder inner diameter (mm {in}) 23.8 {0.937}
Front disc brake
Type
Ventilated disc
Cylinder bore (mm {in}) 57.15 {2.250}
Pad dimensions (area x thickness)
(mm2 {in2} x mm {in})
4800 {7.44} x 10 {0.39}
5300 {8.21 } x '
10 {0.39}
Disc plate dimensions
(outer diameter x thickness) (mm {in})
258 x 24 {10.16 x 0.94}
274 x 24
{10.79 x 0.94}
Rear disc brake
Type Solid disc
Cylinder bore (mm {in})
34.93 {1.375}
Pad dimensions (area x thickness)
(mm2 {in2} x mm {in})
3210 {4.97} x 8.0 {0.31}
Disc plate dimensions
(outer diameter x thickness) (mm {in})
261 x 10 {9.88 x 0.39}
280 x 10
{11.02 x 0.39}
Power brake unit
Type
Vacuum multiplier
Single diaphragm
Diameter (mm {in})
239 {9.41}
Braking force
control device
Type
ABS model: EBD
Non ABS model: Dual proportioning valve
Brake fluid SAE J1703, FMVSSS116 DOT-3 or DOT-4
Parking brake
Type
Mechanical two-rear-wheel control
Operation system Center lever
1 Indicates new specification.
P -2