Mazda 626 Station Wagon, Workshop Manual

Page: 247 / 577

AUTOMATIC TRANSAXLE
Shift solenoid A, B, C
Resistance
1.0—4.2 Q
(ATF temperature: -40— 150°C {-40—302°F})
Shift solenoid D, E
Resistance
10.9—26.2 Q
(ATF temperature: -40—150°C {-40—302°F})
SOLENOID VALVES REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the control valve body. (See K2-46
CONTROL VALVE BODY REMOVAL, On-Vehicle
Removal.)
3. Remove the solenoid valve(s).
SHIFT
SO LENO ID
E
SH IF T
SO LEN O ID D
SH IFT
SO LENO ID
B
PRESSURE
CONTRO L
SOLENOID
S H IF T
SO LEN O ID C
SHIFT
SO LENO ID A
4. Apply ATF to a new O-ring and install it on the
solenoid valve.
5. Install the solenoid valve in the control valve body.
Tightening torque
7.9— 10.7 N m
{80—110 Kgf cm., 70—95.4 in lbf}
PR E SS U R E BOLT
CO N TR O L
SO LEN O ID '
SH IFT
SOLENOID,
D
SHIFT
SOLENOID
A
SHIFT
SOLENO ID
C
SHIFT
SOLENO ID
B
BOLT
BOLT
SH IFT
SO LENO ID
E
6. Install the control valve body. (See K2-46
CONTROL VALVE BODY INSTALLATION,
On-Vehicle Installation.)
7. Add in ATF and, with the engine idling, inspect the
ATF level and inspect for leakage. (See K2-38
AUTOMATIC TRANSAXLE FLUID (ATF)
INSPECTION, ATF Level Inspection.)
8. Carry out the mechanical system test. (See K2-21
MECHANICAL SYSTEM TEST.)
9. Carry out the road test. (See K2-24 ROAD TEST.)
HOLD INDICATOR LIGHT INSPECTION
1. Disconnect the negative battery cable.
2. Remove the instrument cluster. (See Section T.)
3. Inspect for continuity between terminals 1J and
2H.
• If not as specified, replace the HOLD indicator
light.
IN STR U M EN T CLUSTER
Il I I I 1 l" 1 "1 M IBI I
T 4 - ' - - 1 1
r | - r 1 1 r
T
1
M il
1
Uj.
— 1— iJ
H 4 -
----------
2H
4. Install the instrument cluster. (See Section T.)
5. Connect the negative battery cable.
PCM INSPECTION
1. Inspect the PCM. (See Section F1.)
PCM REMOVAL/INSTALLATION
1. Remove the PCM. (See Section F1.)
K 2-40